Electronic Tint
Electronic Tint
Couldn't load pickup availability
Electronic Tint
Honestly impressed with how well this works. The tint switches almost instantly, and the dark setting gives the car a lot more privacy. Installation was easier than I expected too
What to know about Smart Tint?
What to know about Smart Tint?
Technology
Combines advanced PDLC smart tint technology
Offers adjustable privacy tint:
TintIQ Lite Grey:
- 5% β 40% VLT
- Adjustable privacy levels
- Frosted appearance when dark
- Multiple adjustable levels in between
Working Condition
- Built to withstand heat, rain & cold
- Built to work for up to 7 Years
Installation
- Simple installation like normal tint
- Plug-in existing 12V vehicle power
Control
- Controlled by a Single Remote
- Each Window Individually Controlled
Built for Every Type of Vehicle
- Sedans
- Coupes
- SUVs
- Trucks
How to Install
How to Install
1)Β Remove the Door Panel
Carefully remove the interior door panel to access the window glass and wiring area. Keep screws and clips safely aside to avoid damage.
2) Measure & Apply the Film (Dry Installation Only)
Measure the glass precisely and cut the smart film to fit.
β οΈ The window must be completelyΒ cleanΒ andΒ fully dry.
β οΈ Do NOT apply water or soap solution.
Peel the protective layer and carefully apply the film evenly onto the dry glass surface. Use firm pressure to remove air pockets. Avoid bending, folding, or creasing the film.
3) Connect the Power Wire
Run the film wires safely inside the door panel area. Connect the wires to the included inverter, then connect the inverter to the vehicleβs 12V ACC power source.
4) Secure the Inverter
Place the inverter securely inside the door panel.
5) Test Before Closing
Turn the ignition on and test both clear and dark modes to ensure proper operation before reinstalling the door panel.
6) Reinstall the Door Panel
Once confirmed working, reinstall the door panel carefully and tighten all screws.
βΈ»
Important Precautions
β’ Install on a completely dry window (no water)
β’ Do not crease or sharply bend the film
β’ Keep electrical copper edges clean and dry
β’ Do not power the film until installation is fully complete
β’ Ensure all wiring is insulated and secured properly
How does it Work
How does it Work
How PDLC Smart Tint Works
TintIQ Lite uses advanced PDLC technology with liquid crystal particles embedded inside the film.
When powered, the particles align to let light pass through for a clear view. Reduce the power, and the particles scatter to create a frosted haze for privacy.
As voltage increases, the film becomes clearer. Lower the voltage, and the tint becomes more frosted for increased privacy. The film stays frosted in its default state when the car is turned off.
What is Included
What is Included
STANDARD:
[100 x 50 cm / 39.4 x 19.7 Inches] per Side Window
LARGE:
[120 x 65 cm / 47.2 x 25.6 Inches] per Side Window
1 x Inverter per Window
1 x Wireless Remote
1 x Installation Guide
1 x Installation Kit
Free 1 Year Warranty
π¦ How long does shipping take?
π¦ How long does shipping take?
Orders are processed within 24β48 hours. Delivery takes 6β12 business days to the US and 8β16 business days for the rest of the world. Shipping is free worldwide and every order includes a tracking number sent to your email.
In Action
Instant Privacy
Tint on demand β instantly
Remote Controlled
Switch with one button
UV & Heat Block
99% UV & IRR filtered
Energy Efficient
Reduces cabin heat load
Installation is straightforward.
No complicated tools, no heat gun, and no wet shrinking. Everything is designed to install directly inside your vehicle.
Peel & Position
Peel the backing, position the film directly on the inside of the glass, and press it into place.
Press Into Place
No heat gun and no wet shrinking. Simply press the film down evenly for a clean, secure fit.
Connect & Control
Connect to your car's 12V system with the included wire harness, then mount the remote switch inside the cabin.
Customer Review
-
so coool!
Really happy with these tints. Being able to change the darkness whenever I want is a game changer, especially when the sun is strong. Everything has been working perfectly so far.
-
Just Perfect
The installation was straightforward and the finished look is really clean. I love that I can switch the windows from clear to dark with the remote. Definitely one of the best upgrades Iβve made to my car.
-
i love itπ
I wasnβt sure what to expect at first, but these exceeded my expectations. The windows get noticeably darker in seconds and the privacy is excellent. Looks great from the outside too.
Two switching modes.
Go instantly from clear to dark, or gradually adjust the tint to exactly where you want it.
Instant Mode
Switch from clear to dark in under a second. Perfect when you need immediate privacy or shade.
Gradual Mode
Dial the tint level exactly where you want it, with adjustable visibility between 5% and 60% VLT.
How does SPD electronic tint actually work?
SPD stands for Suspended Particle Device. The film contains microscopic light-absorbing particles suspended in a liquid. When no power is applied, the particles are randomly arranged and block light β making the glass dark. When you switch it on, an electric field aligns the particles, allowing light to pass through and making the glass clear. It switches almost instantly.
Is it safe to run electrical film on a car window?
Yes. The film operates at low voltage (typically 40β110V AC at very low current), which is well within safe limits for automotive use. The system is properly fused and designed specifically for vehicle installation. It has been used safely in commercial and residential glass for decades.
Does it work when the car is off?
When the car is off and no power is supplied, the film defaults to its tinted/dark state β giving you privacy and UV protection automatically whenever you park. You only need power to make it go clear. This is ideal for parked vehicles in the sun.
How dark does it get and is it road legal?
The film transitions between approximately 1% and 70% light transmission. In its darkest state it is very private and blocks most light. Road legal requirements vary by country β in many regions rear side windows have no legal limit, but front side windows do. Because the film can be switched clear instantly, it can be used legally by switching to clear when required.
How is it controlled β does it need an app?
No app needed. The system comes with a dedicated remote control so you can switch your windows clear or tinted with one press. Simple, instant, no phone required. The remote is compact and can be mounted inside the vehicle.
How is the film installed on the window?
The SPD film is applied directly to the inside surface of the glass using a specialist adhesive, similar to standard window tint film but with electrical connections wired in. Installation is carried out by a professional fitter. The wiring connects to the vehicle's power supply and remote controller. We recommend professional installation to ensure the electrical connections are safe and sealed correctly.
Does it block UV and heat like regular tint?
Yes β and it performs better than most standard tints. SPD film blocks up to 99% of UV radiation in both clear and tinted states, protecting your skin and interior. It also significantly reduces infrared heat transmission, keeping your cabin cooler whether the film is clear or dark.
Will it affect my vision or create glare at night?
When switched to clear, the film is highly transparent with up to 70% light transmission β similar to standard clear glass. There is a very slight blue-grey tint even in the clear state which is characteristic of SPD technology. At night, simply switch to clear for maximum visibility. The film does not create additional glare.
How long does the film last?
SPD film is built for long-term use and is rated for over 100,000 switching cycles. With normal daily use, this equates to many years of reliable operation. The film itself is UV-stable and resistant to fading. As with any window film, avoiding sharp impacts to the glass will help maintain its longevity.
